Categories
BGP Cambium DIY epmp Mimosa Networking WISP

Lab Network

I am starting an ongoing series involving a semi-static set of devices.  These will involve different tutorials on things such as OSPF, cambium configuration, vlans, and other topics.  Below is the general topology I will use for this lab network.  As things progress I will be able to swap different manufacturers and device models into this scenario without changing the overall topology.  We may add a device or two here and there, but overall this basic setup will remain the same.  This will allow you to see how different things are configured in the same environment without changing the overall scheme too much.

We will start with very basic steps.  How to login to the router, how to set an IP address, then we will move to setting up a wireless bridge between the two routers.  Once we have that done we will move onto setting up OSPF to enable dynamic routing.  After that the topics are open.  I have things like BGP planned, and some other things. If there is anything you would like to see please let me know.

Categories
Bitlomat Cambium Networking UBNT Wireless WISP xISP

Learning, certifications and the xISP

One of the most asked questions which comes up in the xISP world is “How do I learn this stuff?”.   Depending on who you ask this could be a lengthy answer or a simple one sentence answer.  Before we answer the question, let’s dive into why the answer is complicated.

In many enterprise environments, there is usually pretty standard deployment of networking hardware.  Typically this is from a certain vendor.  There are many factors involved. in why this is.  The first is total Cost of Ownership (TCO).  It almost always costs less to support one product than to support multiples.  Things like staff training are usually a big factor.  If you are running Cisco it’s cheaper to train and keep updated on just Cisco rather than Cisco and another vendor.

Another factor involved is economies of scale.  Buying all your gear from a certain vendor allows you to leverage buying power. Quantity discounts in other words.  You can commit to buying product over time or all at once.

So, to answer this question in simple terms.  If your network runs Mikrotik, go to a Mikrotik training course.  If you run Ubiquiti go to a Ubiquiti training class.

Now that the simple question has been answered, let’s move on to the complicated, and typically the real world answer and scenario.  Many of our xISP clients have gear from several vendors deployed.  They may have several different kinds of Wireless systems, a switch solution, a router solution, and different pieces in-between.  So where does a person start?

We recommend the following path. You can tweak this a little based on your learning style, skill level, and the gear you want to learn.

1.Start with the Cisco Certified Network Associate (CCNA) certification in Routing and Switching (R&S).  There are a ton of ways to study for this certification.   There are Bootcamps (not a huge fan of these for learning), iPhone and Android Apps (again these are more focused on getting the cert), online, books, and even youtube videos. Through the process of studying for this certification, you will learn many things which will carry over to any vendor.  Things like subnetting, differences between broadcast and collision domains, and even some IPV6 in the newest tracks.  During the course of studying you will learn, and then reinforce that through practice tests and such.  Don’t necessarily focus on the goal of passing the test, focus on the content of the material.  I used to work with a guy who went into every test with the goal of passing at 100%.  This meant he had to know the material. CompTIA is a side path to the Cisco CCNA.  For reasons explained later, COMPTIA Network+ doesn’t necessarily work into my plan, especially when it comes to #3. I would recommend COMPTIA if you have never taken a certification test before.

2.Once you have the CCNA under your belt, take a course in a vendor you will be working the most with.  At the end of this article, I am going to add links to some of the popular vendor certifications and then 3rd party folks who teach classes. One of the advantages of a 3rd party teacher is they are able to apply this to your real world needs. If you are running Mikrotik, take a class in that. Let the certification be a by-product of that class.

3.Once you have completed #1 and #2 under your belt go back to Cisco for their Cisco Certifed Design Associate (CCDA). This is a very crucial step those on a learning path overlook.  Think of your networking knowledge as your end goal is to be able to build a house.  Steps one and two have given you general knowledge, you can now use tools, do some basic configuration.  But you can’t build a house without knowing what is involved in designing foundations,  what materials you need to use, how to compact the soil, etc.  Network design is no different. These are not things you can read in a manual on how to use the tool.  They also are not tool specific.   Some of the things in the Cisco CCDA will be specific to Cisco, but overall it is a general learning track.  Just follow my philosophy in relationship to #1. Focus on the material.

Once you have all of this under your belt look into pulling in pieces of other knowledge. Understanding what is going on is a key to your success.  If you understand what goes on with an IP packet, learning tools like Wireshark will be easier.  As you progress let things grow organically from this point.  Adding equipment in from a Vendor? Update your knowledge or press the new vendor for training options.  Branch out into some other areas ,such as security, to add to your overall understanding.

Never stop learning! Visit our online store for links to recommend books and products.

WISP Based Traning Folks.
These companies and individuals provide WISP based training. Some of it is vendor focused. Some are not.  My advice is to ask questions. See if they are a fit for what your goals are.
-Connectivity Engineer
Butch Evans
Dennis Burgess
Rickey Frey
Steve Discher
Baltic Networks

Vendor Certification Pages
Ubiquiti
Mikrotik
Cisco
Juniper
CWNA
CompTIA

If you provide training let me know and I will add you to this list.