The WS-PoE-Tester reports voltage and current for PoE systems. It works with 802.3af and passive PoE, and also 802.3at.
Dual displays show the voltage and current on each set of power pairs (Mode A and Mode B) used in PoE. In 802.3at – both power pairs should be active – and both will be displayed.
The tester is protected from reversed power, with a warning LED in case reversed power is applied. Dual inputs allow with straight or crossover ethernet connections ( 568A or 568B ).
In addition, a power supply brick can be tested using the 2.1mm DC power connectors. This allows DC power supplies for laptops, printers or any other application to be tested.
MTIN Family of Sites