Categories
Cambium Tower Wireless WISP WISPA xISP

Frequency does matter

Recently we installed a PTP 550 link for a client.  This is a connectorized version with 2-foot dishes on it for a four-mile link.  Overkill you say, but the idea is the dishes make up the gain and not transmitter power.  A much cleaner signal can be achieved which falls within the FCC guidelines for total EIRP.

So let’s get to it.  Our first image is out path.  This link had clear line of sight from a 150-foot foot water tower to a 240-foot tower.

Google Earth Path
The 240 Foot tower
150 Foot water tower

After getting out of the cold we let things burn in for a few days. This is what an initial spectrum analysis looked like.

Radio Frequency set on 5820 mhz
Radio Frequency set on 5200mhz

As you can see the RSSI was within 2 DB, which isn’t terrible.  However, due to interference, the MCS rates are markedly different, which is what results in the big differences in speed.  Please note this is only with one radio enabled and on a 20mhz channel.  We fully expect bigger speeds once we up channel sizes and enable the second radio.

2 replies on “Frequency does matter”

Comments are closed.

%d bloggers like this: