ePMP 3000 Webinar

Cambium and CTIconnecxt put on a webinar about ePMP 3000 today.  This should be available online at one point.  Look for it in the Cambium forums.

Some notes I took
-ePMP 3000 offers Simultaneous MIMO downlink transmission
-You will be able to use the beamsteering antenna with the 3000.  Cambium is working on the software to make this work.
-3000 has a dedicated receiver chip.  This allows you to run the spectrum analyzer in realtime. Also has “edetect on steroids” which shows more information than the current edetect.
-Sector is a 4X4 90 degree sector with beamforming. Achieves and extra 3db in the downlink.

Beamforming vs Beamsteering
Beamsteering is for dealing with interference.
Beamforming is for downlink gain.

-Cambium mentioned the concept of Azimuth Delta.  This is groups of SMs in terms of how the AP talks to groups.  The gave an example on a google earth plot.  In a nutshell, when you have gain in one direction it takes advantage of the null in different directions. More to this, but that is for another post.

-“Sounding” -Sends a special packet and gets feedback from the subscriber. Determines how the phase shift works and other things.

-Elevated clients beta is coming to make the elevated clients work with the 3000.

I hope distributors work out a smaller cold shrink for the sma connectors on the ePMP Ap radios.  Weatherproofing these properly will be an issue due to the close proximity of the connectors.  I have not seen the connectors on a sector to see how those will be.  This is where folks could take a page from the coldshring that comes with the Baicells gear or the cables with the integrated boot some distributors sell.