Cambium and CTIconnecxt put on a webinar about ePMP 3000 today.\u00a0 This should be available online at one point.\u00a0 Look for it in the Cambium forums.<\/p>\n
Some notes I took
\n-ePMP 3000 offers Simultaneous MIMO downlink transmission
\n-You will be able to use the\u00a0beamsteering antenna with the 3000.\u00a0 Cambium is working on the software to make this work.
\n-3000 has a dedicated receiver chip.\u00a0 This allows you to run the spectrum analyzer in realtime. Also has “edetect\u00a0on steroids” which shows more information than the current\u00a0edetect.
\n-Sector is a 4X4 90 degree sector with beamforming. Achieves and extra 3db in the downlink.<\/p>\n
Beamforming vs Beamsteering<\/strong> -Cambium mentioned the concept of Azimuth Delta.\u00a0 This is groups of SMs in terms of how the AP talks to groups.\u00a0 The gave an example on a google earth plot.\u00a0 In a nutshell, when you have gain in one direction it takes advantage of the null in different directions. More to this, but that is for another post.<\/p>\n -“Sounding” -Sends a special packet and gets feedback from the subscriber. Determines how the phase shift works and other things.<\/p>\n -Elevated clients beta is coming to make the elevated clients work with the 3000.<\/p>\n I hope distributors work out a smaller cold shrink for the sma\u00a0connectors on the ePMP Ap radios.\u00a0 Weatherproofing these properly will be an issue due to the close proximity of the connectors.\u00a0 I have not seen the connectors on a sector to see how those will be.\u00a0 This is where folks could take a page from the coldshring that comes with the Baicells gear or the cables with the integrated boot some distributors sell.<\/p>\n <\/p>\n","protected":false},"excerpt":{"rendered":" Cambium and CTIconnecxt put on a webinar about ePMP 3000 today.\u00a0 This should be available online at one point.\u00a0 Look for it in the Cambium forums. Some notes I took -ePMP 3000 offers Simultaneous MIMO downlink transmission -You will be able to use the\u00a0beamsteering antenna with the 3000.\u00a0 Cambium is working on the software to […]<\/p>\n","protected":false},"author":1,"featured_media":2711,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[119,118],"tags":[681,120,191,682],"jetpack_publicize_connections":[],"aioseo_notices":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2019\/01\/download.jpg?fit=225%2C225&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p6VLMf-HI","jetpack-related-posts":[{"id":3038,"url":"https:\/\/www.mtin.net\/blog\/dmitry-from-cambium-talks-about-epmp-3000-antennas\/","url_meta":{"origin":2710,"position":0},"title":"Dmitry from Cambium talks about ePMP 3000 antennas","author":"j2sw","date":"March 28, 2019","format":false,"excerpt":"I was able to sit down at WISPAMERICA and talk with Dmitry from Cambium about some of the misconceptions of using 3rd party antennas with ePMP 3000.","rel":"","context":"In "Cambium"","block_context":{"text":"Cambium","link":"https:\/\/www.mtin.net\/blog\/category\/cambium\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2019\/01\/session-clipart-CLIPART_OF_18552_SM_2.jpg?fit=640%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2990,"url":"https:\/\/www.mtin.net\/blog\/ptp-550-epmp300-and-epmp-4-3-1-known-issues\/","url_meta":{"origin":2710,"position":1},"title":"PTP 550, EPMP300 and ePMP 4.3.1 known issues","author":"j2sw","date":"March 15, 2019","format":false,"excerpt":"Known issues which may be relevant to you with the ePMP-AC-V4.3.1 released on 11 Mar 2019 ACG-5026 [PTP550] Low percentage of packet loss is seen when traffic is running through SFP interface ACG-5310 [Force 300] PPPoE DL throughput degradation is detected on Force 300 SMs ACG-5320 [ePMP 3000] ePMP 3000\u2026","rel":"","context":"In "Cambium"","block_context":{"text":"Cambium","link":"https:\/\/www.mtin.net\/blog\/category\/cambium\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2017\/08\/ePMP2000_Sector_Beam_angled_left45_tilt_400x300.jpg?fit=460%2C345&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1442,"url":"https:\/\/www.mtin.net\/blog\/epmp-elevate-webinar\/","url_meta":{"origin":2710,"position":2},"title":"ePMP elevate webinar","author":"j2sw","date":"November 30, 2016","format":false,"excerpt":"Some highlights on the ePMP Elevate\u00a0platform. -Allows ePMP Elevate software to run on on non-Cambium 802.11n subscriber modules -ePMP Elevate subscribers function as ePMP subscribers -Solution for WISPs who have hardware deployed. Offers a migration plan. -ePMP AP must be licensed for ePMP Elevate -5GHZ Only -XW and XM based\u2026","rel":"","context":"In "epmp"","block_context":{"text":"epmp","link":"https:\/\/www.mtin.net\/blog\/category\/epmp\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2016\/11\/Screen-Shot-2016-11-30-at-10.14.17-AM-2-300x207.png?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2566,"url":"https:\/\/www.mtin.net\/blog\/cambium-epmp-photos\/","url_meta":{"origin":2710,"position":3},"title":"Cambium ePMP photos","author":"j2sw","date":"November 4, 2018","format":false,"excerpt":"Some ePMP 550 and sectors.","rel":"","context":"In "Cambium"","block_context":{"text":"Cambium","link":"https:\/\/www.mtin.net\/blog\/category\/cambium\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2018\/11\/img_6423.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2018\/11\/img_6423.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2018\/11\/img_6423.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2018\/11\/img_6423.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":369,"url":"https:\/\/www.mtin.net\/blog\/upgrading-epmp-cambium-firmware\/","url_meta":{"origin":2710,"position":4},"title":"Upgrading ePMP Cambium firmware","author":"j2sw","date":"October 29, 2015","format":false,"excerpt":"","rel":"","context":"In "Cambium"","block_context":{"text":"Cambium","link":"https:\/\/www.mtin.net\/blog\/category\/cambium\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":2118,"url":"https:\/\/www.mtin.net\/blog\/cambium-epmp-review-from-crosstalk-solutions\/","url_meta":{"origin":2710,"position":5},"title":"Cambium ePMP Review from CrossTalk Solutions","author":"j2sw","date":"February 20, 2018","format":false,"excerpt":"Crosstalk does an in-depth review of the ePMP 2000 setup. \ufeff","rel":"","context":"In \"2000\"","block_context":{"text":"2000","link":"https:\/\/www.mtin.net\/blog\/tag\/2000\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2017\/08\/ePMP2000_Sector_Beam_angled_left45_tilt_400x300.jpg?fit=460%2C345&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]}],"jetpack_likes_enabled":true,"_links":{"self":[{"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/posts\/2710"}],"collection":[{"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/comments?post=2710"}],"version-history":[{"count":1,"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/posts\/2710\/revisions"}],"predecessor-version":[{"id":2712,"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/posts\/2710\/revisions\/2712"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/media\/2711"}],"wp:attachment":[{"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/media?parent=2710"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/categories?post=2710"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/tags?post=2710"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nBeamsteering is for dealing with interference.
\nBeamforming is for downlink gain.<\/p>\n