This was posted to the AFMUG mailing list from Forrest at Packetflux. Applies to folks with PMP450i and SyncInjectors.<\/p>\n
We have recently become aware of a potential issue when using a SyncInjector with a PMP450i. The short version of this issue is that with certain cable runs (mostly longer ones), a PMP450i will refuse to accept the sync from the SyncInjector as valid, even though the pulse is perfectly valid and should be accepted by the PMP450i.<\/p>\n
Currently, there are two ways this can be fixed. Since the pulse is valid, but just not recognized as valid by the currently shipping PMP450i firmware, Cambium could fix this in software. I believe they are currently investigating this as an issue, and I honestly expect them to release a fix assuming it isn’t a major issue to do so. If this happens, it should address all of the existing SyncInjectors in the field which our customers may want to use in the future with a a PMP450i.<\/p>\n
The second way to fix this issue is for us to modify our sync pulse slightly so that it is in line with what the PMP450i is expecting. Because this modification has some additional benefits beyond better interoperability with the current PMP450i firmware (such as the modified pulse being less likely to induct noise into adjoining cables), we have decided to proceed down this path as well. <\/p>\n
During the next week or so, we will begin shipping Revision I0 of our Gigabit SyncInjector Product. The first of these are currently working their way through our assembly line. This version contains improved support for voltages above 58V and also the waveform modification mentioned above. It should be functionally identical to the earlier Revision H0 SyncInjectors. It is not our intention to update our non-gigabit injectors at this time.<\/p>\n
If you are currently having problems with sync over power on a Gigabit SyncInjector and a PMP450i, please send an email into custsvc@packetflux.com and we will work with you to ensure you have hardware which will work with your hardware.<\/p><\/blockquote>\n","protected":false},"excerpt":{"rendered":"
This was posted to the AFMUG mailing list from Forrest at Packetflux. Applies to folks with PMP450i and SyncInjectors. We have recently become aware of a potential issue when using a SyncInjector with a PMP450i. The short version of this issue is that with certain cable runs (mostly longer ones), a PMP450i will refuse to […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[119],"tags":[229,231,227,228,230],"jetpack_publicize_connections":[],"aioseo_notices":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p6VLMf-6E","jetpack-related-posts":[{"id":2710,"url":"http:\/\/www.mtin.net\/blog\/epmp-3000-webinar\/","url_meta":{"origin":412,"position":0},"title":"ePMP 3000 Webinar","author":"j2sw","date":"January 3, 2019","format":false,"excerpt":"Cambium and CTIconnecxt put on a webinar about ePMP 3000 today.\u00a0 This should be available online at one point.\u00a0 Look for it in the Cambium forums. Some notes I took -ePMP 3000 offers Simultaneous MIMO downlink transmission -You will be able to use the\u00a0beamsteering antenna with the 3000.\u00a0 Cambium is\u2026","rel":"","context":"In "Cambium"","block_context":{"text":"Cambium","link":"http:\/\/www.mtin.net\/blog\/category\/cambium\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2019\/01\/download.jpg?fit=225%2C225&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":289,"url":"http:\/\/www.mtin.net\/blog\/upgrading-epmp-gps-firmware\/","url_meta":{"origin":412,"position":1},"title":"Upgrading EPMP GPS Firmware","author":"j2sw","date":"May 5, 2015","format":false,"excerpt":"Beginning with System Release 2.0, users can upgrade the firmware of the on-board GPS chip present on the Connectorized Radio with Sync. To upgrade the on-board GPS chip on a Connectorized Radio with Sync: 1. Navigate to Monitor => GPS to check the GPS Firmware Version that is currently present\u2026","rel":"","context":"In \"cambium\"","block_context":{"text":"cambium","link":"http:\/\/www.mtin.net\/blog\/tag\/cambium-2\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":3489,"url":"http:\/\/www.mtin.net\/blog\/cambium-and-mt-everest\/","url_meta":{"origin":412,"position":2},"title":"Cambium and Mt. Everest","author":"j2sw","date":"June 3, 2019","format":false,"excerpt":"Cool article on https:\/\/blog.j2sw.com https:\/\/blog.j2sw.com\/cambium\/cambium-networks-on-mt-everest\/","rel":"","context":"In "Cambium"","block_context":{"text":"Cambium","link":"http:\/\/www.mtin.net\/blog\/category\/cambium\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":2388,"url":"http:\/\/www.mtin.net\/blog\/cambium-antenna-alignment-video\/","url_meta":{"origin":412,"position":3},"title":"Cambium Antenna alignment video","author":"j2sw","date":"August 20, 2018","format":false,"excerpt":"Cambium goes through alignment of the 450b SM unit.","rel":"","context":"In "Cambium"","block_context":{"text":"Cambium","link":"http:\/\/www.mtin.net\/blog\/category\/cambium\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":2978,"url":"http:\/\/www.mtin.net\/blog\/cambium-multi-mimo\/","url_meta":{"origin":412,"position":4},"title":"Cambium Multi MIMO","author":"j2sw","date":"March 14, 2019","format":false,"excerpt":"Cambium shows us some of the features and benefits of the 450 and MU - MIMO.","rel":"","context":"In "Cambium"","block_context":{"text":"Cambium","link":"http:\/\/www.mtin.net\/blog\/category\/cambium\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2018\/02\/IMG_3317.jpg?fit=900%2C1200&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2018\/02\/IMG_3317.jpg?fit=900%2C1200&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.mtin.net\/blog\/wp-content\/uploads\/2018\/02\/IMG_3317.jpg?fit=900%2C1200&resize=700%2C400 2x"},"classes":[]},{"id":2736,"url":"http:\/\/www.mtin.net\/blog\/playing-with-obs-and-cambium-switch-quick-look\/","url_meta":{"origin":412,"position":5},"title":"Playing with OBS and Cambium Switch quick look","author":"j2sw","date":"January 21, 2019","format":false,"excerpt":"Trying out OBS software and a quick look at Cambium switch line.","rel":"","context":"In "Cambium"","block_context":{"text":"Cambium","link":"http:\/\/www.mtin.net\/blog\/category\/cambium\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]}],"jetpack_likes_enabled":true,"_links":{"self":[{"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/posts\/412"}],"collection":[{"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/comments?post=412"}],"version-history":[{"count":1,"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/posts\/412\/revisions"}],"predecessor-version":[{"id":413,"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/posts\/412\/revisions\/413"}],"wp:attachment":[{"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/media?parent=412"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/categories?post=412"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.mtin.net\/blog\/wp-json\/wp\/v2\/tags?post=412"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}