Categories
Mikrotik

Mikrotik Router OS 6.36.2

To upgrade, click “Check for updates” at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

v6.36.2 forum topic discussion,
http://forum.mikrotik.com/viewtopic.php?f=21&t=111450

What’s new in 6.36.2 (2016-Aug-22 12:54):

*) arm – show cpu frequency under resources menu;
*) capsman – fixed upgrade policy;
*) ccr/crs – fixed SFP+ interface ddmi info reporting function. Info is now refreshed on regular intervals;
*) conntrack – fixed ipv6 timeout display;
*) conntrack – fixed removing icmpv6 connections;
*) dns – avoid unnecessary dynamic server address saving in storage;
*) dns – allow to set query-server-timeout and query-total-timeout only greater than 0s;
*) dns – fixed lockup when dynamic dns server address 0.0.0.0 was received;
*) export – updated default values in /system routerboard settings menu;
*) partitions – fixed crash on repartition when there is not enough free space;
*) sstp – fixed disconnects on transmit for multicore systems;
*) switch – fixed configuration reload on CRS switches;
*) winbox – make queue tree default queue type default-small;

Categories
Mikrotik

Mikrotik RouterOS 3.36

Lots of things fixed in this release.

What’s new in 6.36 (2016-Jul-20 14:09):

*) arm – added Dude server support;
*) dude – (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110428);
*) dude – server package is now made smaller. client side content upgrade is now removed from it and is downloaded straight from our cloud. So workstations on which client is used will require access to wan. Alternatively upgrade must be done by reinstalling the client on each new release;
*) firewall – added “/interface list” menu which allows to create list of interfaces which can be used as in/out-interface-list matcher in firewall and use as a filter in traffic-flow;
*) firewall – added pre-connection tracking filter – “raw” table, that allow to protect connection-tracking from unnecessary traffic;
*) firewall – allow to add domain name to address-lists (dynamic entries for resolved addresses will be added to specified list);
*) wireless – wireless-fp is discontinued, it needs to be uninstalled/disabled before upgrade;
*) address – allow multiple equal ip addresses to be added if neither or only one is enabled;
*) address-list – make “dynamic=yes” as read-only option;
*) arm – fixed kernel failure on low memory;
*) arp – added arp-timeout option per interface;
*) bonding – fixed 802.3ad load balancing mode over tunnels ;
*) bonding – fixed bonding primary slave assignment for ovpn interfaces after startup;
*) bonding – fixed crash on RoMON traffic transmit;
*) bonding – implemented l2mtu value == smallest slave interfaces l2mtu;
*) capsman – fixed crash when running over ovpn;
*) certificate – added automatic scep renewal delay after startup to avoid all requests accessing CA at the same time;
*) certificate – cancel pending renew when certificate becomes valid after date change;
*) certificate – display issuer and subject on check failure;
*) certificate – do not exit after card-verify;
*) certificate – force scep renewal on system clock updates;
*) chr – fixed CHR seeing its own system disk mounted as additional data disk;
*) clock – fixed time keeping for SXT ac, 911L, cAP, mAP lite, wAP;
*) clock – save current time to configuration once per day even if there are no time zone adjustments pending;
*) cloud – fixed export order;
*) console – fixed get false function;
*) console – show message time in echo log messages;
*) defconf – changed channel extension to 20/40/80mhz for all ac boards;
*) dhcp-pd – correct server listing for commands;
*) dhcp-server – fixed radius framed route addition after reboot on client renew;
*) dhcpv6-client – fixed ia lifetime validation when it is set by dhcpv6 client;
*) dhcpv6-relay – set packet link-address only when it is manually configured;
*) dhcpv6-server – fixed binding last-seen update;
*) disk – added support for Plextor PX-G128M6e(A) SSD on CCR1072;
*) email – fixed send from winbox;
*) email – removed subject and body length limit;
*) ethernet – fixed incorrect ether1 link speed after reboot on rb4xx series routers;
*) ethernet – fixed memory leak when setting interface without changing configuration;
*) fastpath – fixed kernel failure when fastpath handles packet with multicast dst-address;
*) fetch – support tls host name extension;
*) firewall – added udplite, dccp, sctp connection tracking helpers;
*) firewall – do not show disabled=no in export;
*) firewall – fixed spelling in built-in firewall commentary;
*) gps – fixed longitude seconds part;
*) health – fixed broken factory voltage calibration data for some hAP ac boards;
*) health – fixed incorrect voltage after reboot on RB2011UAS;
*) icmp – fixed kernel failure when icmp packet could not be processed on high load;
*) ippool6 – fixed crash on acquire when prefix length is equal with pool prefix length;
*) ipsec – add dead ph2 detection exception for windows msgid noncompliance with rfc;
*) ipsec – added dead ph2 reply detection;
*) ipsec – don’t register temporary ph2 on dead list;
*) ipsec – fix initiator modecfg dynamic dns;
*) ipsec – fixed AH with SHA2;
*) ipsec – fixed checks before accessing ph1 nat options;
*) ipsec – fixed mode-config export;
*) ipsec – fixed route cache overflow when using ipsec with route cache disabled;
*) ipsec – fixed windows msgid check on x86 devices;
*) ipsec – show remote peer address in error messages when possible;
*) ipsec – store udp encapsulation type in proposal;
*) kernel – fixed possible kernel deadlock when Sierra USB mode is being used;
*) l2tp – fixed crash when rebooting or disabling l2tp while there are still active connections;
*) lcd – reduced lowest backlight-timeout value from 5m to 30s;
*) license – do not expire demo license right after fresh installation of x86;
*) log – added whole scep certificate chain print;
*) log – increase excessive multicast/broadcast warning threshold every time it is logged;
*) log – make logging process less aggressive on startup;
*) lte – added allow-roaming option for Huawei MU709, ME909s devices;
*) lte – added cinterion pls8 support;
*) lte – added support for Huawei E3531;
*) lte – added support for ZTE ZM8620;
*) lte – added use-peer-dns option (will work only combined with add-default-route);
*) lte – changed driver loading for class 2 usb rndis devices;
*) lte – display message in lte,error log if no response received;
*) lte – display message in lte,error log when PIN is required;
*) lte – fix crash on SXT LTE while resetting card while at high traffic;
*) lte – fixed access technology logging;
*) lte – fixed connection for Huawei without cell info;
*) lte – fixed modem init when pin request present;
*) lte – fixed modem network configuration version checks;
*) lte – fixed network-mode support after downgrade;
*) lte – Huawei MU609 must use latest firmware to work correctly;
*) lte – improved multiple same model modems identification;
*) lte – show uicc for Huawei modems;
*) lte – use only creg result codes as network status indications;
*) mesh – fixed crash when connection references a mesh network but it is not available any more;
*) modem – added support for Alcatel OneTouch X600;
*) modem – added support for Quectel EC21 and EC25;
*) modem – added support for SpeedUP SU-900U modem;
*) nand – improved nand refresh feature to enhance stored data integrity;
*) ovpn – enable perfect forwarding secrecy support by default;
*) ovpn – fixed compatibility with OpenVPN 2.3.11;
*) pppoe – allow to set MTU and MRU higher than 1500 for PPPoE;
*) pppoe – do not allow to send out bigger packets than l2mtu if mrru is provided;
*) proxy – limit max ram usage to 80% for tile and x86 devices;
*) queue – reset queue type on interfaces which default queue type changes to no-queue after upgrade;
*) rb2011 – fixed ether6-ether10 flapping when two ports from both switch chips are in the same bridge;
*) rb3011 – fixed port flapping on ether6-ether10;
*) rb3011 – fixed reset button functionality;
*) rb3011 – fixed usb driver load;
*) rb3011 – fixed usb storage mounting;
*) rb3011 – improved performance on high cpu usage;
*) route – added suppport for more than 8 bits of options;
*) route – fixed ospf by handling ipv6 encoded prefixes with stray bits;
*) sniffer – fixed ipv6 address matching;
*) snmp – fixed get function for snmp>=v2 when oid does not exist;
*) snmp – fixed interface stats branch from MikroTik MIB;
*) snmp – report current access technology and cell id for lte modems;
*) snmp – report ram memory as ram instead of other;
*) ssh – add rsa host key size parameter;
*) ssh-keygen – add rsa key size parameter;
*) ssl – do not exit while there still are active sessions;
*) ssl – fixed memory leak on ssl connect/disconnect (fetch, ovpn, etc.);
*) sstp – fixed dns name support in connect-to field if http-proxy is specified;
*) supout – erase panic data properly on Netinstall;
*) switch – fixed switch compact export;
*) timezone – updated timezone information from tzdata2016e release;
*) traffic-flow – added ipfix support (RFC5101 and RFC5102);
*) tunnel – added option to auto detect tunnel local-address;
*) tunnel – fixed rare crash by specifying minimal header length immediately at tunnel initialization;
*) upnp – fixed nat rule dst-port by making it visible again;
*) usb – I-tec U3GLAN3HUB usb hub/ethernet dongle now shows up correctly as ethernet interface;
*) usb – implement possibility to recognize usb hubs/ethernet-dongles (if usb hubs/ethernet-dongles are not recognized with this version – send supout.rif file);
*) userman – fixed crash on database upload;
*) userman – use ipnpb.paypal.com for payment verification;
*) wap-ac – fixed performance problems with 2.4GHz wireless (additional reboot after upgrade required);
*) webfig – do not allow to press OK or Apply if current configuration values are not loaded yet;
*) webfig – reduced refresh time for wireless registration table to 1 second;
*) winbox – added 2ghz-g/n band for wireless-rep;
*) winbox – added icons to bridge filter actions similar to ip firewall;
*) winbox – added support for ipv6 dhcp relay;
*) winbox – allow to reorder hotspot walled-garden & walled-garden-ip rules;
*) winbox – do not allow to specify vlan-mode=no-tag in capsman datapath config;
*) winbox – do not show filter for combined fields like bgp-vpn4 RD;
*) winbox – do not show mode setting for WDS interfaces;
*) winbox – fixed crash on disconnect in secure mode;
*) winbox – fixed crash when using ctrl+d;
*) winbox – fixed safe mode;
*) winbox – improve filtering on list fields;
*) winbox – report correctly dude users in active users list;
*) winbox – set default sa-learning value to “yes” for CRS Ingress VLAN Translation rules;
*) winbox – show action column as first in bridge firewall;
*) winbox – show error when telnet is not allowed because of permissions;
*) wireless – fixed multiple wireless packages enabled at the same time after upgrade;
*) wireless-rep – added initial API support for snooper;
*) wireless-rep – fixed crash on nv2 reconnect;
*) wireless-rep – fixed scan-list unset;
*) wireless-rep – treat missing SSID element as hidden SSID;

Categories
Mikrotik

An open letter to Mikrotik about bug fixes

This isn’t your typical “rag on Mikrotik” post.  I see some frustrations with the Mikrotik process, mainly in regards to getting ongoing bugs and issues fixed. Having a persistent bug continue for large amounts of times tends to make for a frustrating experience.  Mikrotik has made leaps and bounds in their Changelogs over the past couple of years, which has been a huge help in the decisions of what software versions to upgrade (or even downgrade) to.  But I think things get lost in the process. This results in ongoing bugs, which tend to get unburied if someone makes enough noise.

One of the biggest things I would like to see is a public bug tracking system like Redhat’s Bugzilla tracking system.  This would benefit the community as a whole and help users see some of the outstanding issues when they go to implement things.  Forums are a great tool, but due to the nature of them, you get a fair amount of mis-information and unrelated chatter.  Just because Joe says he is seeing a bug, doesn’t mean he has a confirmed bug.  Having a confirmed bug system that has information and able to have moderated comments would be beneficial in many ways:
1.Users with long term bugs they are experiencing or waiting on would be able to keep informed on open status of bugs.
2.Would cut down on the “non-scientific” nature of forums. Information could be specifically submitted in support of a confirmed bug. Bug reports normally include the conditions that need to be met or existing for the bug to manifest itself. Users can then confirm, under those specific conditions, if they are experiencing a certain bug.
3.Bugs that are important to users will get reported more often. This should lead to the more important bugs being upvoted by the community thus getting them fixed earlier. If your particular bug has low numbers you have a reference as to why it’s not being addressed in a timely manner. Companies have to give resources to places they get the most bang for the buck.

Not only would this keep Mikrotik accountable, but it would keep the community accountable.  Properly reporting bugs and reproducing them is a process. It takes effort on both the user and the developer. In the end, it makes for a better product.

I have the utmost respect for Mikrotik and their staff.  Several folks there I consider friends. I think, before growing pains get too out of hand some sort of additional feedback options would be helpful for the community at large. Mikrotik is getting there. Things like making bug fix versions and release-candidate versions available, along with changelogs has been a huge help for planning and just keeping up on what’s being addressed.

What prompted this was I had a client over the past weekend who started having OSPF issues. Many hours of troubleshooting later, and only talking to some other folks who were seeing the same issues, I was able to determine a specific RouterOS version was to blame.  Being able to attach data to a specific bug report, or having Mirkotik open up a new bug based on information I submitted would have been a great help to others.  A forum of blog post would have been too general. Forums posts also tend to bring out the “I am seeing that too” and they are not meeting the same conditions you are.

Mikrotik implement a bug tracking system! Bugzilla is even on GitHub.

Categories
BGP Networking

How I learned to love BGP communities, and so can you

BGP communities can be a powerful, but almost mystical thing.  If you aren’t familiar with communities start here at Wikipedia.  For the purpose of part one of this article we will talk about communities and how they can be utilized for traffic coming into your network. Part two of this article will talk about applying what you have classified to your peers.

So let’s jump into it.  Let’s start with XYZ ISP. They have the following BGP peers:

-Peer one is Typhoon Electric.  XYZ ISP buys an internet connection from Typhoon.
-Peer two is Basement3. XYZ ISP also buy an internet connection from Basement3
-Peer three is Mauler Automotive. XYZ ISP sells internet to Mauler Automotive.
-Peer four is HopOffACloud web hosting.  XYZ ISP and HopOffACloud are in the data center and have determined they exchange enough traffic amongst their ASN’s to justify a dedicated connection between them.
-Peer five is the local Internet exchange (IX) in the data center.

So now that we know who our peers are, we need to assign some communities and classify who goes in what community.  The Thing to keep in mind here, is communities are something you come up with. There are common numbers people use for communities, but there is no rule on what you have to number your communities as. So before we proceed we will need to also know what our own ASN is.  For XYZ we will say they were assigned AS64512. For those of you who are familiar with BGP, you will see this is a private ASN.  I just used this to lessen any confusion.  If you are following along at home replace 65412 with your own ASN.

So we will create four communities .

64512:100 = transit
64512:200 = peers
64512:300 = customers
64512:400 = my routes

Where did we create these? For now on paper.

So let’s break down each of these and how they apply to XYZ network. If you need some help with the terminology see this previous post.
64512:100 – Transit
Transit will apply to Typhoon Electric and Basement3.  These are companies you are buying internet transit from.

64512:200 – Peers
Peers apply to HopOffACloud and the IX. These are folks you are just exchanging your own and your customer’s routes with.

64512:300 – Customers
This applies to Mauler Automotive.  This is a customer buying Internet from you. They transit your network to get to the Internet.

64512:200 – Local
This applies to your own prefixes.  These are routes within your own network or this particular ASN.

Our next step is to take the incoming traffic and classify into one of these communities. Once we have it classified we can do stuff with it.

If we wanted to classify the Typhoon Electric traffic we would do the following in Mikrotik land:

/routing filter
add action=passthrough chain=TYPHOON-IN prefix=0.0.0.0/0 prefix-length=0-32 set-bgp-communities=64512:100 comment="Tag incoming prefixes with :100"

This would go at the top of your filter chain for the Typhoon Electric peer.  This simply applies 64512:100 to the prefixes learned from Typhoon.

In Cisco Land our configuration would look like this:

route-map Typhoon-in permit 20  
match ip address 102  
set community 64512:100

The above Cisco configuration creates a route map, matches a pre-existing access list named 102, and applies community 64512:100 to prefixes learned.

For Juniper you can add the following command to an incoming peer in policy-options:

set community Typhoon-in members 64512:100

Similar to the others you are applying this community to a policy.

So what have we done so far, we have taken the received prefixes from Typhoon Electric and applied community 64512:100 to it.  This simply puts a classifier on all traffic from that peer. We could modify the above example to classify traffic from our other peers based upon what community we want them tagged as.

In our next segment we will learn what we can do with these communities.

Categories
Mikrotik

Mikrotik RouterOS 6.34.6 released

Direct from Mikrotik

To upgrade, click “Check for updates” at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

What’s new in 6.34.6 (2016-Jun-06 08:37):

*) discovery – fixed identity discovery (introduced in 6.34.5);
*) log – fixed time zone adjustment (introduced in 6.34.5);
*) snmp – fixed snmp timeout (introduced in 6.34.5);
*) vrrp – fixed missing vrrp interfaces after upgrade (introduced in 6.34.5).

Categories
Mikrotik

Temp reading from a powered mAP lite

This is just sitting idle.

IMG_2999

Categories
BGP Mikrotik Networking

Mikortik User Meet 2016 Presentation

My powerpoint converted to PDF. Topics Include:

Carrier Grade NAT
Xbox & Nat
BGP Tips

mum-2016

Categories
Mikrotik

Mikrotik wAP first looks

The routerboard at the USA Mikrotik User Meeting (MUM) this year was the wAP. For the official specifications on this little gem visit here.  Some highlights of this AP.
-802.11 b/g/n
-Weatherproof
-Secure mounting
-802.3at POE
-11-57volt
IMG_2872
As you can see a great deal of thought was given into the included parts with this unit.  Mount, screws, poe, and even a thick paper template for drilling the wall and ceiling mount.

IMG_2874

Whomever is in charge of package and documentation design at Mikrotik gets high marks in my book for this setup. Included is a little instruction sheet which has topics for first use, powering, booting, connecting are all included on the first page in a concise manner.  On the second page instructions on netinstall, bootloader, and even enabling CAPs mode are all explained.

IMG_2873

At a street price of $45 for this model these have many uses.  Outbuildings, work shops, patios, and many other places where an AP needs a little protection from the elements, are all good deployment choices.

Categories
Site News

MTIN announces new pricing tiers

MTIN is happy to announce support tiers for our clients.  This allows us to grow, while still being in budget range of the smaller operators.  This is our first rate increase in over 3 years.  By breaking our rates into two tiers this allows us to grow our increasing client base while still being an affordable client. The price levels allow us to add additional resources, automation, and tools to bring better service to clients.

Tier I Support
Network/Server Work                               $97 per hour
Late night & Weekend support                 $125 per hour

Hourly Blocks
5 hours              $461   (5% discount)
10 hours            $899   (7% discount)
15 hours            $1310 (10% discount)

On-Site consulting services                      $700 per day plus expenses
On-Site tower work                                  $500-1500 per day plus expenses (job specific)

Tier1 emergency response times for Tier I customers with a time balance.
Normal working hours (2 hour maximum)
Late night and weekend (3 hour maximum)

 

 

Tier II Support
Network/Server Work                                $79 per hour
Late night & Weekend support                  $99 per hour

Hourly Blocks
5 hours                       $395
10 hours                     $790
15 hours                     $1067 (10% discount)

Tier2 emergency response times for Tier II customers with a time balance
Normal working hours (4 hour maximum)
Late night and weekend (5 hour maximum)

 

 

Contracts available
-Priority support
-Faster response times
-Late night & Weekend support rates don’t apply
-Access to backend monitoring and other services
Contact MTIN on details on contracts

Policy details

1.Late night and Weekend is defined as. 9PM-9AM EST MONDAY-FRIDAY & 8PM EST FRIDAY -9AM Monday. For West coast and customer in other time frames work can be schedule to meet your needs and not be charge for after hours.

2.All customers who don’t have pre-purchased time will be served on a best effort service. Priority will be given to contract customers, and then customers with a balance, and finally to “walk-in” customers.

3.All times stated are maximum times for response. Depending on workload, times are typically much less.

Categories
Mikrotik

Lots of changes in RouterOS 6.34

Lots of changes in RouterOS 6.34
Some Standouts that will be of benefit to alot of folks I know
*) mipsle – architecture support dropped (last fully supported version 6.32.x);
*) btest – significantly increased TCP bandwidth test performance;
*) ssh – fixed possible kernel crash;
*) crs212 – fix 1Gbps ether1 linking problem;
*) tile – make sure that SFP rj45 modules that use forced 1G FD settings work correctly after system reboot;

What’s new in 6.34 (2016-Jan-29 10:25):

*) mipsle – architecture support dropped (last fully supported version 6.32.x);
*) dude – The reports of my death have been greatly exaggerated;
*) dude – dude RouterOS package added for tile and x86 (CHR) architecture;
*) dude – package included by default to all CHR images;
*) dude – initial work on dude integration into RouterOS;
*) bgp vpls – fixed initialization after reboot;
*) mpls – forwarding of VRF over TE tunnel stopped working after BGP peer reset;
*) ipsec – improved TCP performance on CCRs;
*) btest – significantly increased TCP bandwidth test performance;
*) winbox – fixed possible busy-loop on v2.x with latest 6.34RC versions;
*) cerm – allow to sign certificates from imported CAs created with RouterOS;
*) ldp – fix MPLS PDU max length;
*) net – improve 64bit interface stats support;
*) routerboard – print factory-firmware version in routerboard menu;
*) snmp – add oid from ucd mib for total cpu load OID 1.3.6.1.4.1.2021.11.52.0;
*) winbox – add extra items automatically to multi-line fields if at least one of them is required;
*) winbox – implemented full ipv6 dhcp client;
*) winbox – update blocked flag if user changed blocked field in dhcp server lease;
*) mac-telnet – fixed backspace when typing login username;
*) sstp – allow ECDHE when pfs enabled;
*) lte – fixed info command for Cinterion EHS5-E modem;
*) fast-path – fixed kernel crash on on/off;
*) licensing – fixed that some old 7 symbol keys could not be upgraded;
*) ssh – fixed possible kernel crash;
*) console – fixed crash on creating variable with “?” in it;
*) chr – fix SSH key import on AWS;
*) crs212 – fix 1Gbps ether1 linking problem;
*) timezone – use backward timezone aliases;
*) lte – support serial port for DellWireless 5570;
*) lte – improved dhcp handling on interfaces that doesn’t support it;
*) ipsec – allow my-id address specification in main mode;
*) dhcpv6 client – fix remove when client reappears on restart;
*) default config – fix hAP lite with one wireless;
*) firewall – added inversion support for “limit” option;
*) firewall – added bit rate matching for “limit” option;
*) firewall – improved performance for “limit” option;
*) dhcpv6-client – fix ia lifetime check;
*) ipsec – prioritize proposals;
*) ipsec – support multiple DH groups for phase 1;
*) netinstall – fix apply default config;
*) tile – make sure that SFP rj45 modules that use forced 1G FD settings work correctly after system reboot;
*) wireless – added WPS buttons support on hAP and hAP ac lite;
*) upnp – added comment for dynamic dst-nat rules to inform what host/program required it;
*) webfig – recognize properly CHR;
*) chr – license fix for AWS and similar solutions;
*) arm – fix usb modem modules on ARM;
*) dhcpv6-client – fixed stopped state;
*) netinstall – sort packages by name;
*) firewall – do not allow to add new rule before built-in (reverted);
*) winbox – include FP in fast-path column names;
*) ipsec – fix phase2 hmac-sha-256-128 truncation len from 96 to 128
This will break compatibility with all previous versions and any other
currently compatible software using sha256 hmac for phase2;
*) ssh, ftp – make read, write user group policy aware;
*) tunnel – fix keep-alive (introduced in 6.34rc);
*) cerm – show last crl update time;
*) quicket – support CAP mode on all existing wireless packages;
*) wlan – add united states3 country;
*) fast-path – fix locking issue which could lead to reboot loop (introduced in 6.34rc20);
*) userman4 – try loading signup files from db path first;
*) sstp – allow to limit tls version to v1.2 only;
*) chr – make tool profile work on 64bit x86;
*) dhcpv6-server – added binding server=all option;
*) hotspot – added html-directory-override & recognize default hotspot user;
*) hotspot – fixed export of default trial user;
*) hotspot – fixed memory leak on https requests;
*) winbox – allow to specify amsdu-limit & amsdu-threshold on 11n wifi cards;
*) winbox – added multicast-buffering & keepalive-frames settings to wireless interfaces;
*) CHR – implemented trial support for different CHR speed tiers;
*) dhcpv6-client – fix add route/address;
*) usb – enable ch341 serial module;
*) lte – make sure that both LTE miniPCI-e cards are recognized;
*) winbox – show Common-Name of certificates in certificate list;
*) winbox – added units to PCQ queue fields;
*) net – do not break connection when interface is added to bridge;
*) hotspot – show cookie add/remove events in hotspot,debug log;
*) hotspot – allow static entries with the same mac on multiple hotspot servers;
*) hotspot – do not remove mac-cookie in case of radius timeout;
*) hotspot – added byte limits option for default-trial users;
*) ipsec – make sure that dynamic policy always has dynamic flag;
*) CAPsMAN – use CAP name in log when remote-cap is deleted (wireless-cm2);
*) hotspot – fixed login by mac-cookie when roaming among hotspot servers;
*) hotspot – add html-directory-override for read-only directory on usb flash;
*) hotspot – add uptime, byte and packet counter variables to logout script;
*) net – fix statistics counters jumping up to 4G;
*) firewall – SIP helper update for newer Cisco phones;
*) usermanager – fixed usermanager web page crash;
*) ipsec – fixed active SAs flushing;
*) hotspot – added option to login user manually from cli;
*) hotspot – fixed trial-uptime parsing from CLI to Winbox/Webfig;
*) lte – added support for multiple E3372 on the same device;
*) modem – added wpd-600n ppp support;
*) console – fixed incorrect disabled firewall rule matching to “invalid flag”;
*) dns – fix for situation when dynamic dns servers could disappear;
*) sfp – fix 10g ports in 1g mode (introduced in 6.34rc1);
*) CCR1072 – added support for S-RJ01 SFP modules;
*) trafficgen – fixed issue that traffic-generator could not be started twice without reboot;
*) dhcpv6-server – replace delay option with preference option.

*) winbox – show properly route-distinguisher for bgp vpn4;
*) winbox – show dhcp server name in dhcp leases;
*) ppp – make CoA work correctly with address-lists;
*) winbox – fixed tab names to correspond to console;
*) winbox – show only actual switch-cpu ports in switch setting combobox;
*) winbox/webfig – fixed version column ordering in ip neighbors list;
*) webfig – fixed switch port “default vlan id” has missing “auto” value;
*) webfig – fixed firewall connection-bytes option;
*) ipsec – fixed kernel failure after underlying tunnel has been disabled/enabled;
*) romon – allow to see device identity if it is longer than 31 character;
*) fastpath – show fp counters in /interface monitor aggregate;
*) bridge firewall – fix chain check (broken since 6.33.2);
*) bridge firewall – fixed crash when jump rule points to disabled custom chain;
*) smb – fix crash when changing user which has open session;
*) address-list – properly remove unused address-lists from drop-downs;
*) fetch – fixed closure after 30 seconds;
*) capsman – fix radius accounting stop message;
*) log – reopen log file if deleted;
*) packing – fix tcp/udp checksums when simple packing is used;
*) tile – fix ipsec freeze after SA updates;
*) upnp – fixed missing in-interface option for dynamic dst-nat rules;
*) tunnel – fix complaining about loop after ~248 days;
*) vrrp – make sure that VRRP gets state on bootup;
*) ppp – fixed rare kernel crash (introduced in v6.33);
*) ppp – do not allow empty name ppp secrets;
*) ssh – fix active user accounting.